SIIG AV-GM05F3-S1 User Manual

1x6 12g/6g/3g/hd/sd-sdi distribution amplifier with reclocking

Advertisement

Quick Links

1x6 12G/6G/3G/HD/SD-SDI Distribution
Amplifier with Reclocking
P/N: AV-GM05F3-S1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AV-GM05F3-S1 and is the answer not in the manual?

Questions and answers

Summary of Contents for SIIG AV-GM05F3-S1

  • Page 1 1x6 12G/6G/3G/HD/SD-SDI Distribution Amplifier with Reclocking P/N: AV-GM05F3-S1...
  • Page 2: Table Of Contents

    However, like all electronic equipments, the AV-GM05F3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
  • Page 3: Introduction

    INTRODUCTION The AV-GM05F3-S1 receives one SDI input, perfectly duplicates it, and re-transmits six SDI outputs for real time multi-viewing. It is a reliable video device splitting a SDI, HD-SDI, 3G-SDI, 6G-SDI, or 12G-SDI video source to six SDI compliant displays at the same time.
  • Page 4: Specifications

    SPECIFICATIONS Model Name AV-GM05F3-S1 Technical SDI standard SMPTE / DVB-ASI Multi-Rate Support Auto detection of SD, HD, 3G, 6G or 12G Signals SMPTE 424M, SMPTE 292M, SMPTE 344M, SMPTE 259M, DVB-ASI, SDI Compliance ST-2081(6G), ST2082(12G) SDI Data rates 1.485 / 2.97 / 5.94 / 11.88 Gbps Output impedance 75...
  • Page 5 -20~60°C [-4~140°F] Storage temperature 20~90% RH [no condensation] Relative humidity The measurement results are from Phabrix QX with SDI through 1m (3.3ft) long Belden 1694A.
  • Page 6: Panel Descriptions

    PANEL DESCRIPTIONS Front Panel LED indicator (Lock/Rate/Power) Lock – When the input is detected, the LED will be bright Rate – When the input source is more than HD, such as 3G, 6G or 12G, the LED will be bright Power –...
  • Page 7: Hardware Installation

    1. Connect a camera or other devices equipped with 12G/6G/3G/HD/SD-SDI outputs to AV-GM05F3-S1 12G/6G/3G/HD/SD-SDI input. 2. Connect devices equipped with 12G/6G/3G/HD/SD-SDI inputs (e.g. monitors or video processors) to AV-GM05F3-S1 12G/6G/3G/HD/SD-SDI outputs. 3. Plug power adapter cable into 5V DC power jack.
  • Page 8: Warranty

    Also, the technical information contained herein regarding the AV-GM05F3-S1 features and specifications is subject to change without further notice. Support For more info or tech support http://www.siig.com/support...
  • Page 9: Signal Measurement

    SIGNAL MEASUREMENT...

Table of Contents