1x6 hd/sd-sdi distribution amplifier with reclocking (10 pages)
Summary of Contents for SIIG 1x2 HDMI Distribution Amplifier with 3D and 4K x 2K
Page 1
4K x 2K Quick Installation Guide Introduction The 1x2 HDMI Distribution Amplifier with 3D and 4K x 2K provides the most cost effective and advanced HDMI splitter solution by which high definition video and high quality audio can be transmitted to 2 different locations without losing quality.
Page 2
Layout DC In HDMI Out RS-232 Status HDMI In Power Switch Figure 1: Rear Panel • Status LED: Indicates the status of the splitter. Green LED means the transmission signal is detected • HDMI In: Connect your HDMI source here •...
Page 3
Hardware Installation General instructions for connecting devices are provided below. Please consult your device's users manual for more information, if needed. Power off all devices, including monitors. Connect your HDMI source (such as a Blu-ray DVD player) to the HDMI In. Connect your HDMI display(s) to the HDMI Out(s).
Page 4
Application HDMI source (desktop, NB, DVD player) Power adapter connected to an external power Desktop or NB source for future firmware update HDMI cable* RS-232 cable HDMI cable* HDMI cable* HDMI display HDMI display * Transmission distance is up to 5m for input, and 10m for output. Figure 2: Application...
Page 5
Firmware Update Follow the instructions below to update the firmware when suggested to do so. Power off the switch. Set the DIP switch up to ON. Connect an RS-232 cable between your PC and the RS-232 connector of the switch. Open the firmware update software, set the correct COM port and baud rate, see Figure 3.
Page 6
Program MCU symbol File button Figure 4 Once the process is done, power off the switch and disconnect it from the computer. Set the DIP switch back to position 1. Power up the switch again to complete the firmware update. Safety Precautions Please read and follow the safety guidelines to protect yourself from possible injury and to minimize the risk of...
Page 7
(3) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
Page 8
Fremont, CA 94538-3152, USA Phone: 510-657-8688 1x2 HDMI Distribution Amplifier with 3D and 4K x 2K is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.
Need help?
Do you have a question about the 1x2 HDMI Distribution Amplifier with 3D and 4K x 2K and is the answer not in the manual?
Questions and answers