Spin Speed Selection - Beko WMY 71441PTL User Manual

Operating the product
the steps do not allow it.
C
If you scroll to cold wash option and press
Temperature Adjustment button again, the
recommended maximum temperature for
the selected programme appears on the
display. Press the Temperature Adjustment
button again to decrease the temperature.

5.5 Spin speed selection

Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the Spin Speed
indicator.
C
It is possible that the recommended spin
speed value is not the maximum spin
speed that can be selected for the current
programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed decreases
gradually.
Then, depending on the model of the product,
"Rinse Hold" and "No Spin" options appear on the
display.
C
Spin Speed
serves for decreasing the spin speed.
Rinse Hold option is indicated with "ı_ı"
symbol and No Spin option is indicated
with "_" symbol.
If you are not going to unload your laundry
immediately after the programme completes, you
can use Rinse Hold function in order to prevent
Washing Machine / User's Manual
88
0 C
88:88
1888
Adjustment button only
them from getting wrinkled when there is no water
in the machine.
This function holds the laundry in the final rinsing
water.
If you want to spin your laundry after the Rinse
Hold function:
- Adjust the Spin Speed.
- Press Start / Pause / Cancel button. The
programme resumes. Machine spins the laundry
by discharging the water.
If you want to discharge the water at the end of
the programme without spinning, use No Spin
function.
C
No change can be made in programmes
where spin speed adjustment is not
allowed.
You can change the spin speed after the washing
starts if the washing steps allow it. Changes
cannot be made if the steps do not allow it.
88
C
0
88:88
88
C
0
88:88
21 / EN