Table of Contents
Advertisement
manual
CHAPTER 7
PROBLEM
No display
Digits flash
Display doesn't respond
to load changes
Display experiences
excessive
Displayed weight shows
Zero drift between
weighment
large error
Wireless distance shortened Wireless indicator's
Nordens största webbshop för vågar
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
Defective battery
Defective button
Power button not
properly depressed
Low battery
Faulty loadcell or PCB
Out of calibration
DYNA LINK do not
stabilize after turning on
DYNA LINK not
Zeroed before
Requires recalibration
applying weight
Kg/lb wrong selecion
battery is low
SOUTION
Replace
Requires authorized service
Press ON/OFF key firmly
in three seconds
Recharge the battery
Requires authorized service
Re- calibration
After turning on, heating 3-5
minutes.
Depress ZERO
before applying
See calibration
weight
See operation
Replace battery.
Web
www.vetek.se
Email
info@vetek.se
Advertisement
Table of Contents
