Download Print this page

FIM Flexy Twin Instructions For Assembly And Use

Hide thumbs Also See for Flexy Twin:

Download this manual

Flexy Twin

Need help?

Do you have a question about the Flexy Twin and is the answer not in the manual?

Page 1 Flexy Twin...
Page 2: Important Safety Instructions
These instructions have to be handed over to the end-user of the product who has to read and keep them. These instructions are provided for an easy set-up of your FLEXY TWIN and for your safety. It is essential that the given instructions are followed carefully.
Page 3 Take out the content of the bag of hardware (H). Screw the feet (f) to the base (F), put the base where you want to assemble Flexy Twin. Make sure that the base is level using the adjustable the feet (f).
Page 4: Maintenance And Care
The Flexy Twin is now ready to be used. Pulling one end of the cord the canopy will slide fully open, pulling the other end of the cord the canopy will close. In case the canopy is opened or closed block the cord in the rope cleat fixed on the lever (Q). To change the canopy tilt pull the lever (Q).
Page 5 Fig. 1A Fig. 1B Fig. 2A Fig. 2B e3 e4 e5 e3 e4 e5 Fig. 3A Fig. 4A Fig. 3B Fig. 4B CARRIER PLATE PLUS WEIGHT PLATES Fig. 5...
Page 6 Fig. 6B DUAL CANOPY UNIT Fig. 6A SINGLE CANOPY UNIT 220 V Fig. 6C...
Page 7 Fig. 7 Fig. 8 Fig. 9...
Page 8 Fig. 10...
Page 9 Fig. 11...
Page 10 Fig. 11...
Page 11 FIM Flexy Panel Fastening Instructions In order to make the Flexy Panels easier to install, with a cleaner look, we have updated the process to fasten the panels into the track. Slide the panel into the tracks on the bottom of the support arms, making sure...