Table of Contents
Advertisement
KEY LEGEND CHANGE
3/4 INCH FULL TRAVEL KEYBOARDS
The key legends for full travel keyboards can be changed by one of two methods depending on
the type of keys installed on the keyboard. For keys with legends permanently printed on the keys,
the entire keycap can be changed by placing a flat head screwdriver under the existing key and
applying an upward pressure to aid in pulling off the key top, then push on the new key. The
legends for keyboards with relegendable key tops are changed by removing the clear top portion
of the key, replacing the existing legend tab with a new one, then replacing the clear top.
A full line of keycaps or relegendable tops is available for
purchase from Ultimate Technology Corporation in a variety of
colors and with legends customized to the users specifications.
BATTERY REPLACEMENT
The keyboard contains a 3-volt lithium battery replaceable with Panasonic Part No. BR2032 or equivalent. Under
normal use of the keyboard, this battery typically has a 5-year life. To replace the battery, proceed as follows:
Never try to disassemble, recharge, or short circuit battery. Never expose batteries to
excessive heat.
Keep batteries out of the reach of children. If battery should accidentally be swallowed,
contact a doctor immediately.
Never try to disassemble or modify any battery, or battery pack, for use in the keyboard.
Always dispose of used batteries in a proper and environmentally safe manner. If
necessary, used batteries may be returned to Ultimate Technology Corporation for
proper disposal.
Series 600 POS Keyboard
NOTE
WARNING
64
Advertisement
Table of Contents
