Preparation/Mounting - Jensen CAR1000 Installation & Owner's Manual

CAR1000
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
MOUNTING SCREWS
M2.6
x
6.0mm M5.0
x
6.0mm
TRIM RING
MOUNTING BRACKET
LEFT/RIGHT
VIEW
OF
SCREEN
* Use 2 or 3 screws to affix the monitor to the bracket.
5
PREPARATION
Preparation
M5.0
x
5.0mm