Table of Contents
Advertisement
DO NOT OPEN ANY PART OF THE POWER SYSTEM.
Unauthorized personnel opening the power system may
cause injury or death.
DO NOT drive, drag or place objects over the power cord. Do
not stand or walk on the power cord.
EQUIPMENT not suitable for use in the presence of a
FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH
OXYGEN OR NITROUS OXIDE.
Setting up the cart
When the cart is equipped with monitor arms, do not attach
monitors and/or accessories to the arms of which the total
weight is heavier than indicated on the arm.
When installing cables alongside the monitor arms, store the
cables into the cable channels and make sure the cables are
long enough to move around the joints. This prevents
damage to the cables during use.
Make sure that the cart meets the tip-test requirements as
stated in the UL/IEC 60601-1 standard.
Cleaning the cart
First switch off all the equipment on the cart. The mains
cable which provides electricity must be removed from the
plug point. This prevents you getting an electric shock.
The cart may only be cleaned with a slightly damp cloth with
a non-aggressive mild (household) cleaning agent. Do not
use abrasive cleaners, solvents, polishers, waxes or steam
cleaning tools.
Pagina 7
Advertisement
Table of Contents
