Table of Contents
Advertisement
Do not drive the cart over inclines and obstacles such as
cables and thresholds (elevator entrance). If this is
necessary, do it slowly and with a minimum of two persons.
Be aware: a heavily loaded cart always has a certain brake
path. Take this into account!
If you plan to move backwards, watch out that you do not
become trapped between the cart and obstacles.
Usage of the cart
The equipment on and inside the cart needs electricity to be
able to function. In most cases the cart is equipped with a 5
metre mains cable for this. Do not lay the mains cable over
pathways, and prevent persons from tripping over the cable.
If the cart is equipped with an arm to which a monitor is
attached, make sure that when moving the monitor, the arm
does not hit any objects or persons.
NEVER PULL OR PUSH THE ARM TO MOVE TE CART!
WHEN POSITIONING THE ARM, DO NOT PULL THE ARM INTO
POSITION, BUT ROTATE THE PIVOT POINTS INDIVIDUALLY!
For stability reasons the castors of the cart are placed a bit
outside the cart body. Be aware of the trip hazard.
If any component off the cart is missing or damaged, the
cart may not be used.
Pagina 5
Advertisement
Table of Contents
