Advertisement
5.3.
Fit sponge filter assembly, (for wet vacuuming), fig.4.
5.4.
Fit hose assembly, fig.5.
5.5.
Tube/s and brush assembly, fig.6.
5.6.
Blow function, fig.7.
5.7.
Cable storage, fig.8.
5.8.
Accessory storage, fig.9.
6. OPERATION
6.1.
DRY VACUUM
6.1.1.
Unplug from mains supply. Fit paper bag, fig.2, cartridge filter, fig.3 and tube brush assembly, fig.6.
6.2.
WET VACUUM
6.2.1.
Unplug from mains supply.
6.2.2.
Remove paper dust bag and cartridge filter, fig's 2 & 3. Fit sponge filter assembly, fig.4.
6.2.3.
Connect to mains supply. When maximum capacity is reached the machine will stop running.
6.2.4.
Unplug from mains supply undo clips and empty contents of tank into a suitable receptacle.
6.3.
BLOWER OPERATION
6.3.1.
Remove from mains supply. Remove hose from suction port and attach to hose outlet on top of machine, fig.7.
7. MAINTENANCE
7.3.1.
Ensure the machine is unplugged from the mains supply.
7.3.2.
Disconnect the hose from the container.
7.3.3.
Undo the clasps and remove motor head from the container.
7.3.4.
Clear out any dirt or debris from the container and hose.
7.3.5.
Check the power cable to make sure it has not received any damage.
7.3.6.
Handle the filters carefully when cleaning or installing.
© Jack Sealey Limited
fig.4
fig.6
fig.8
Original Language Version
fig.7
fig.9
fig.5
PC20LN,PC30LN | Issue 1 08/01/20
Advertisement
