Troubleshooting - Oregon Professional 120V Series Original Instruction Manual

Troubleshooting

All of the tools in the Oregon 120V Professional Series have the ability to self-diagnose issues
Below is a table of fault codes the tool can display through the dashboard
INDICATORS
LEDs
none
1 continuous red light
red
1 slow blinking red light
red
alternating green and red lights
green red
4 green, 1 red, 1 blue quick blinking lights
green green green green red
1 short, 1 long blinking red light
red
2 short, 1 long blinking red light
red
4 green and 1 red continuous lights
green green green green
5 blinking green lights
green green green green green
20
Troubleshooting
SOUND
none
steady on
slow beep
(repeating)
rapid beep
(repeating)
very rapid short
beep (repeating)
blue
1 short,
1 long beep
2 short,
1 long beep
none
red
none
POSSIBLE
CAUSE
Make certain the plug is fully
No power.
seated in socket.
Disconnect the battery
plug from the tool. Remove
Blade is jammed.
engine lockout key. Remove
obstruction from blade area.
Battery is fully
Charge battery.
discharged.
Service battery.
Battery fault. Contact authorized repair
center.
Unplug, wait 30 seconds, plug
back in.
Hardware fault.
Contact authorized repair
center.
Battery too hot. Allow battery to cool.
Lawn mower engine Allow lawn mower engine to
too hot. cool.
Failed dashboard. Replace dashboard.
Upper engine control
Release upper engine control
bar is activated
bar. Unplug lawn mower. Plug
while battery plug is
in lawn mower.
inserted.
Lawn Mower Model LMA120VX-NA
RECOMMENDED
ACTION