Maintenance - Havso Jacob 2.0 User Manual

Care and cleaning
Always disconnect the appliance from the power outlet and leave it to cool down
completely before cleaning. Never immerse the kettle or cord in water, or allow
moisture to contact with these parts.
Removal of mineral deposits
Mineral deposits in tap water may cause the kettle interior to discolor. To remove
this build-up, use non-toxic liquid descaler.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar and the rest with water. Do not boil.
Allow to stand overnight.
2. Empty the solution from the kettle. Any stains remaining inside the spout can
be removed by rubbing with a damp cloth. Fill the kettle with clean water, bring
to boil and then discard the water.
3. Repeat and the kettle will then be ready to use.
Cleaning external housing
– Wipe the external housing with a wild and damp cloth or cleaner.
Caution: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the kettle.
Cleaning the filter
– Remember to clean the filter with a damp cloth.
Storage
– When not in use or storage, the power cord may be wound around the cord
storage under the base of kettle.

MAINTENANCE

13