Maintenance; Specifications - Havso Jacob 4.0 User Manual

MAINTENANCE

Cleaning and maintenance
– Always disconnect the appliance from the power outlet before cleaning.
– Never immerse the kettle, power cord or power base in water, or allow moisture
to contact with these parts.
– Wipe the outside of body with a damp cloth or cleaner, never use a poisonous
cleaner.
– Remember to clean the filter at intervals. For easier cleaning, detach the filter
and then replace it after cleaning.
Note: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the kettle to prevent the gloss loss.
– When not use or storage, the power cord may be wound under the bottom of
kettle.
Removal of mineral deposits
Your kettle should be periodically descaled as the mineral deposits in tap water
may form scale on the bottom of kettle - which may affect the performance of
the product. You can use the commercially available descaler and follow the
instructions on the package of descaler. Alternatively, you may follow below
instructions and use white vinegar:
– Fill the kettle with 3 cups of white vinegar, then add water to the amount so
as to cover the bottom of kettle completely. Leave the solution in the kettle
overnight.
– Then discard the mixture in the kettle, fill the kettle with clean water, boil and
then discard the water. Repeat several times until the odor of vinegar has
been flushed away. Any stains remaining inside the spout can be removed by
rubbing with a damp cloth.

SPECIFICATIONS

Model number
Power supply
Effect
14
530060
AC 220-240V, 50/60Hz
1850 - 2200 W