FujiFilm FinePix Z20fd Owner's Manual page 6

NOTICES
To prevent fire
or
shock hazard, do not expose the unit
to
rain
or
moisture.
Notes on the Grant
To comply with Part 15 of the FCC Rules, this product must be used with a
FUjifilm-specified ferrite-core AN cable, USB cable, and DC supply cord.
Please read the "Safety Notes" (pages iii-iv) and make sure you understand
For Customers in Canada
them before using the camera.
CAUTION This Class Bdigital apparatus complies with Canadian ICES-003.
~
This product comes with batteries. When these are empty, you
shouldn't throw them away but deliver them as domestic chemicol
refuse.
•
Signature, Managing Director Date
September 1,2007
Place
Kleve, Germany
EC Declaration ofConformity
We
Name:
Address:
FUJIFILM Electronic Imaging Europe GmbH
Benzstrasse 2
47533 Kleve, Germany
declare that the product
Product Name FUJIFILM DIGITAL CAMERA FinePix nOfd
Manufacturer's Name: FUJIFILM Corporation
Manufacturer's Address: 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO,
107-0052 JAPAN
conforms to the following Standards:
Safety: EN60065: 2002
+
A1
EMC:
EN55022: 1998
+
A1: 2000
+
A2: 2003 Class B
EN55024: 1998
+
A1: 2001
+
A2: 2003
EN61000-3-2: 2000
+
A2: 2005
EN61000-3-3: 1995
+
A1: 2001
+
A2: 2003
following the provision of the EMC Directive (2004/108/EC) and Low Volt-
age Directive (2006/95/EC).
CE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Perchlorate Material-special handling may apply. See http://wwwdtsc
co.govlhozordouswastelperchlorote.
For Customers in the U.S.A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
CAUTION
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved
in this manual could void the user's authority to operate the equipment.
vi