Man V8-1000 Installation And Operating Instructions Manual page 83

Fuel prefilter with water separator - changing fuel filter cartridge
1 Close shutoff valves between engine and tank.
2. Disconnect the electrical connection
3. Unscrew the filter cup
cartridge 1 .
2
4. Clean the filter cup
5. Coat new seals with fuel.
6. Screw on a new fuel filter cartridge
new seal until the seal makes contact.
7. Tighten the fuel filter cartridge
by a 3/4 turn.
8. Tighten the filter cup
Tightening torque . . . . . . . . . . . . . . . . . . . .
9. Connect the electrical connection
10.Bleed the fuel system, see page 85.
NOTE
MAN accepts no liability for material defects caused by the use of non-approved spare parts.
MAN accepts no responsibility for damage caused by the installation of spare parts of non-MAN origin.
For this reason:
S Only use genuine MAN spare parts.
Carefully read through the Operating Instructions before starting any work!
This particularly applies to the General Safety Instructions section
and the safety instructions in the various chapters.
3
.
2 and fuel filter
.
1 with a
1
by hand
2 with new seal.
20 Nm
3
.
MAN marine diesel engines D2868 LE4.. / D2862 LE4..
Maintenance and Care
81