Advertisement
Quick Links
Modbus Driver and Modbus 250 Driver
These installation instructions cover the connection
of the Modbus Driver and Modbus 250 Driver to the
vendor system only. For hardware installation of the
Modular Equipment Controller, see document number
565-570. For hardware installation of the Power
Open Processor, see document number 565-571.
Product Description
The driver enables communication between the
®
APOGEE
Automation System and the vendor
system.
Product Numbers
Modbus Driver
986-90392A
986-90392B
986-90392C
986-90392D
986-90392E
986-90392F
986-90392G
Item Number: 565-887, Rev. DA
Modbus Driver, Open
Processor with RS-485
ALN
Modbus Driver, Open
Processor with Ethernet
ALN
Modbus Driver, MEC with
RS-485 ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, HOA-ready
Modbus Driver, MEC with
RS-485 ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, with HOA
Modbus Driver, MEC with
RS-485 ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, modem, HOA-ready
Modbus Driver, MEC with
RS-485 ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, modem, with HOA
Modbus Driver, MEC with
Ethernet ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, HOA-ready
Installation Instructions
986-90392H
986-90392L
986-90392M
986-90392N
Modbus 250 Driver
986-90399A
986-90399B
986-90399C
986-90399D
986-90399E
986-90399F
986-90399G
Document No. 565-887
October 27, 2006
Modbus Driver, MEC with
Ethernet ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, with HOA
Modbus Driver, MEC with
BACnet/IP ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, HOA-ready
Modbus Driver, MEC with
BACnet/IP ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, with HOA
Modbus Driver, Open
Processor with BACnet/IP
ALN
Modbus 250 Driver, Open
Processor with RS-485 ALN
Modbus 250 Driver, Open
Processor with Ethernet ALN
Modbus 250 Driver, MEC
with RS-485 ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, HOA-ready
Modbus 250 Driver, MEC
with RS-485 ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, with HOA
Modbus 250 Driver, MEC
with RS-485 ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, modem, HOA-ready
Modbus 250 Driver, MEC
with RS-485 ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, modem, with HOA
Modbus 250 Driver, MEC
with Ethernet ALN, 8DI, 8DO,
8AI, 8AO, point expansion
support, HOA-ready
Page 1 of 6
Advertisement
Related Manuals for Siemens Modbus Driver
Summary of Contents for Siemens Modbus Driver
- Page 1 These installation instructions cover the connection 986-90392H Modbus Driver, MEC with Ethernet ALN, 8DI, 8DO, of the Modbus Driver and Modbus 250 Driver to the 8AI, 8AO, point expansion vendor system only. For hardware installation of the support, with HOA Modular Equipment Controller, see document number 565-570.
- Page 2 30 minutes. For Modbus TCP and Modbus RTU Required Tools and Materials over Ethernet, use IEEE 802.3 standard Ethernet connections and cabling to • Flat-blade screwdriver (1/8-inch blade width). complete your network infrastructure. Page 2 of 6 Siemens Building Technologies, Inc.
- Page 3 (STANDARD 24 AWG LOW CAPACITANCE) MAX LENGTH 4000’ MODBUS DEVICE(S) TERMINAL BLOCK TO ADDITIONAL MODBUS DEVICES Figure 1. Using a Trunk/RS-422 Interface to Connect the Driver to the Vendor’s Modbus Master or Modbus Slave Device. Page 3 of 6 Siemens Building Technologies, Inc.
- Page 4 (MAX 50’ / 15.24 m; STANDARD 24 AWG LOW CAPACITANCE) MODBUS DEVICE(S) Figure 2. Using a Trunk Interface II to Connect the Driver to the Vendor’s Modbus Master or Modbus Slave Device. Page 4 of 6 Siemens Building Technologies, Inc.
- Page 5 STANDARD 24 AWG LOW CAPACITANCE) ONE TWISTED PAIR TAPE BACK SHIELD MODBUS TERMINAL DEVICE(S) BLOCK APPLICABLE TO ADDITIONAL MODBUS DEVICES Figure 3. Direct Connect the Driver to the Vendor’s Modbus Master or Modbus Slave Device. Page 5 of 6 Siemens Building Technologies, Inc.
- Page 6 Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. © 2006 Siemens Building Technologies, Inc. Siemens Building Technologies, Inc.