Table of Contents
Advertisement
is replaced with "Set Succeeded" or "Set Failed." If invalid data is
present in an input field, the system issues an error message and does
not accept any data changes until the error is corrected. If changes
have been made to fields that are marked with an (*), the modem
will reboot when <Enter> is pressed.
XL-12000S Keyboard Commands
<Ctrl- > followed by a letter, such as <Ctrl-X >, means you that
press and hold the Control key while pressing the letter key.
Table 7.1 Keyboard Commands
KEY
<Ctrl-D>
Backspace & Delete
Character Overstrike
No Insert Mode
<Ctrl-A>
<Ctrl-E>
<Ctrl-W>
<Ctrl-L>
<Tab>
<Esc> <Tab>
<Ctrl-X>
Enter
Arrow Keys:
Left arrow or <Ctrl-B>
Right arrow or <Ctrl-F>
Up arrow or <Ctrl-P>
Down arrow or <Ctrl-N>
7.0 CONFIGURE THE MODEM
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
DESCRIPTION
Deletes the character that the cursor is on
(forward delete).
Deletes the character before the cursor.
Typing a character replaces the character that was there.
If you delete a character, it moves the remaining
characters to the left; there is no way of moving them
to the right.
Takes you to the beginning of the current field.
Takes you to the end of the current field.
Clears the active input field.
Refreshes the screen.
Moves the cursor to the beginning of the next field.
Moves the cursor to the beginning of the previous field.
Returns to Main Menu without saving changes.
Accepts all changes made on the screen. The operator
will remain on the screen unless a field marked with an
"*" has been changed. In this case the modem will
reboot.
Moves the cursor left within the field or if at the end of
the field moves cursor to the end of the previous field.
Moves the cursor right within the field or if at the end
of the field moves the cursor to the beginning of the
next field.
Moves to the closest available position on the line above.
Moves to the closest available position on the line below.
XL-12000S
TUT SYSTEMS
27
Advertisement
Table of Contents
