Page 1
Flyron Technology Co., Ltd. FN-AL6T Multifunctional MP3 Player FN-AL6T Multifunctional MP3 Player User’s Manual Version: V1.0 1. Features 6 trigger inputs available and triggered by negative pulse or GND. The function/trigger mode of each input can be set individually through a configuration file.
Page 2
Flyron Technology Co., Ltd. FN-AL6T Multifunctional MP3 Player Flash memory size: 4MB Audio format: MP3/WAV 3. Operation Guide 3.1. Set Work Mode There are 7 main trigger modes(from “0” to “6”) and 5 assistant work modes(from “7” to “B”) available for users to set in a configuration file according to the actual needs Each of the parameters from “0”...
Page 3
Flyron Technology Co., Ltd. FN-AL6T Multifunctional MP3 Player Pulse Non-interruptible: In this mode, a single negative pulse will start playback. It's not possible to interrupt the playback by pressing the same button or the other buttons. Once an audio file is triggered, the audio file will not be able to be interrupted/cancelled during playback.
Page 4
Flyron Technology Co., Ltd. FN-AL6T Multifunctional MP3 Player extension “.txt” must be changed to “.cfg’’, otherwise the file is not workable. Refer to the image below. 3.2. Audio Files Loading See the image below. There is a micro USB socket on the device, and users can connect it to computer through an Android phone purposed USB cable to load audio files and configuration file.
Page 5
Flyron Technology Co., Ltd. FN-AL6T Multifunctional MP3 Player Refer to the image below. 9). Safely remove the USB cable from computer. 10). Apply power to the equipment and push any of 6 buttons to play back a corresponding sound. Notes: 1). If the total of 6 audio files is less than 4Mbytes, it’s fine to directly use the built-in flash memory. If they are larger than 4Mbytes, please use a micro card instead.
Page 6
Flyron Technology Co., Ltd. FN-AL6T Multifunctional MP3 Player 4). Build 6 new folders in the micro SD card and rename them 01, 02, 03, 04, 05, and 06. The first trigger input will be associated with the folder 01, the second trigger input will be associated with the folder 03,...and the sixth trigger input will be associated with folder 06.