Heatstore HSTR50C Installation Instructions

Towel rail

Enlarged version

IF YOUR TOWEL RAIL DOES NOT WORK

Check that the fuse has not blown at the ﬂex outlet, or at the distribution

board.

Should none of the above remedies work, then consult an accredited

service agent.

If the appliance is still under guarantee, return it to your supplier or contact

our after sales service.

DO NOT attempt to repair the Towel Rail.

Electrical: 50W; 220-240V; 50Hz;

Dimensions/weight: 550h x 550w x???d mm; 2.2kG;

O N E YE A R

Waste electrical products should not be disposed of with household waste. Please recycle

where facilities exist. Check with your local authority or retailer for recycling advice.

Telephone: 0117 923 5375 Fax: 0117 923 5374

Victoria Road, Avonmouth, Bristol BS11 9DB

www.heatstore.co.uk

IF IN ANY DOUBT ABOUT THE INSTALLATION OR USE OF THIS

ISSUE 1: 0412

HSTR50C Towel Rail

Installation Instructions

WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED.

PLEASE READ ALL INSTRUCTIONS CAREFULLY

AND RETAIN FOR FUTURE REFERENCE

PRODUCT, CONSULT A COMPETENT ELECTRICIAN.

Table of Contents

Do you have a question about the HSTR50C and is the answer not in the manual?

Page 1 IF YOUR TOWEL RAIL DOES NOT WORK HSTR50C Towel Rail Check that the fuse has not blown at the ﬂex outlet, or at the distribution Installation Instructions board. Should none of the above remedies work, then consult an accredited service agent.
Page 2 SAFETY AND ELECTRICAL MOUNTING PROCEDURE G This equipment has been designed and manufactured to the highest When installed in a bathroom, the Towel rail must be at least 600mm away international standards, but like all electrical appliances that are from the bath or shower area. The Towel Rail should always be ﬁxed to the operated by mains voltage, care must be taken if you are to obtain the wall at least 600mm above the ﬂoor level.