Operation; Normal Operation; Decommissioning; Redeployment And Configurations - Kamstrup READy Mini Concentrator Installation And Operation Manual

Installation and operation guide

4 Operation

4.1 Normal operation

When READy Mini Concentrator is in normal operation, the power and dot LEDs are on
solidly. Data is sent according to your READy Manager subscription, and READy Mini
Concentrator automatically changes the transmission scheme if your READy subscription
or settings change.
If the power supply is disconnected or interrupted and connected later, the device
automatically connects to READy Manager again – there is no need for reconfiguration.
If the exclamation mark LED blinks red, READy Mini Concentrator has lost connection to
the Internet. Reconfigure READy Mini Concentrator through the WLAN interface.

4.2 Decommissioning

If the product is decommissioned for disposal, see section 7 'Disposal' .
If READy Mini Concentrator is to be decommissioned, simply unplug the power supply.
READy Mini Concentrator will immediately stop sending data to READy Manager and is
ready to be installed at a new location or disposed of.

4.3 Redeployment and configurations

For redeployment of READy Mini Concentrator, follow the installation and configuration
steps in section 2.2.

5 Maintenance and support

READy Mini Concentrator does not require any maintenance other than cleaning.

5.1 Transport

When unplugged, READy Mini Concentrator is ready to be transported. If possible, use the
standard packaging when transporting READy Mini Concentrator.

5.2 Firmware updates

READy Mini Concentrator supports FOTA and automatically updates its firmware, if
necessary. Firmware is pushed directly to the device from Kamstrup.

5.3 Kamstrup support

Hotline:
Email:
Support site:
16
+45 8993 1110
supportdesk@kamstrup.com
https://support.kamstrup.dk
Kamstrup A/S • 55122428_A3_GB_04.2019