Table of Contents
Advertisement
Risk of damage to the fixing
bracket and cover.
The cover on the fixing bracket can
easily become detached.
Always close the cover as soon as
you have finished working on the
bracket.
Loosely screw the fixing brackets
into the pre-drilled holes in the appli-
ance door using hex screws .
Tip: Secure a pair of fixing brackets in
the handle area of the door.
Close the covers.
Push the appliance two thirds of the
way into the building-in niche. When
pushing the appliance into its niche,
make sure that the mains cable does
not get trapped.
Tip: To help you push it into position, tie
a piece of string around the plug to
"lengthen" the power cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the ap-
pliance is in the unit.
Installation
55
Advertisement
Table of Contents
