Installation
Snap off any protruding ends from
the fixing brackets. They are no
longer required and can be disposed
of.
Replace covers and on the fix-
ing brackets.
60
Only for an appliance with a niche
height greater than 140 cm
To enhance the stability of the appli-
ance in the unit, push the rods supplied
in underneath the appliance between it
and the floor of the housing unit:
First secure the handle to one of
the stabilising rods .
Push the stabilising rod into the
guide hole as far as it will go. Remove
the handle , fit it to the other rod
supplied and push this into its guide
as far as it will go.
Tip: Keep the handle somewhere safe
in case you ever need to fit the appli-
ance into a new housing unit.
Close the appliance doors.