Download
Share
Print this page
Makita EW1060H Technical Information
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Water Pump
  5. EW1060H
  6. Technical information

Makita EW1060H Technical Information

Engine pump
Hide thumbs Also See for EW1060H:

Advertisement

Quick Links

Download this manual
T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Model EW1060H is 33.5cc 4-stroke engine pump to comply with
all major exhaust emission regulations in the world.
It features the same pumping capacity as the predecessor EPH1000,
but it is more cost effective than EPH1000.
This product is also available with nozzle and 8m delivery hose
as Model EW1060HX.
S
pecification
Specifications
Type
Displacement: cm³ (cu.in.)
Engine
Fuel
Max. output: kW (PS)
Max. torque: N·m
Speed at no load: min.
In compliance with exhaust emission regulations:
CARB Tier 3, EPA Phase 2, EU Stage 2
Fuel tank capacity: L (US oz)
Engine oil
Carburetor
Starting system
Primer pump
Max. total head: m (ft)
Max. suction head: m (ft)
Max. pumping capacity: L/min (US oz/min)
Suction & discharge diameter: mm (")
Net weight*
: kg (lbs)
3
*2 Brazil: 25E gasoline
*3 Dry weight, without suction hose
S
tandard equipment
Suction hose .......................... 1
Socket wrench ....................... 1
Hose coupling ....................... 2 (for some countries only)
Rapid type hose coupling ...... 2 (for some countries only)
1 inch NPT adapter ............... 1 (for Canada, Mexico, Colombia, Chile, Peru and Brazil only)
Hose band ............................. 3
Strainer ................................. 1
Delivery hose (8m) ............... 1 (for EW1060HX only)
Nozzle ................................... 1 (for EW1060HX only)
Note: The standard equipment for the tool shown above may vary by country.
O
ptional accessories
Rapid type Hose coupling set,
Coupling for water supply hose (with Hose band),
8m Delivery hose (with Nozzle),
1 inch NPT adapter
EW1060H
Engine Pump
Model
¹ = rpm
ˉ
EW1060H
4-stroke
33.5 (2.0)
Straight unleaded gasoline*
1.07 (1.5) [at 7,000 min.
1.35 [at 5,500 min.
7,000
Yes
0.65 (22.0)
SAE10W-30 oil
in the class SF or higher of API Classification
Diaphragm
Recoil starter, with mechanical decompression
Yes
45 (148)
8.0 (26)
130 (4,400)
25.4 (1)
7.3 (16.1)
PRODUCT
H
W
Dimensions*
: mm (")
1
Length (L)
356 (14)
Width (W)
234 (9-1/4)
Height (H)
336 (13-1/4)
*1 without suction hose
2
¹]
ˉ
¹]
ˉ
P 1/ 10
L

Advertisement

loading

Related Manuals for Makita EW1060H

Summary of Contents for Makita EW1060H

  • Page 1 Description Engine Pump ONCEPT AND MAIN APPLICATIONS Model EW1060H is 33.5cc 4-stroke engine pump to comply with all major exhaust emission regulations in the world. It features the same pumping capacity as the predecessor EPH1000, but it is more cost effective than EPH1000.

  • Page 2: Pump Section

    P 2/ 10 epair CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [3] DISASSEMBLY/ASSEMBLY OF PUMP SECTION [3] -1. Pump Section DISASSEMBLING (1) Separate Base from Pump section by unscrewing M8x16 Hex bolt (2 pcs.) as drawn in Fig. 1. Fig.
  • Page 3 P 3/ 10 epair [3] DISASSEMBLY/ASSEMBLY OF PUMP SECTION [3] -1. Pump Section (cont.) DISASSEMBLING (3) Remove Refueling winding from Refueling handle group and from Carburetor as drawn in Fig. 3. Fig. 3 1. Remove Air cleaner cover by unscrewing M5x14 Pan head screw. Then remove Refueling winding from Carburettor.
  • Page 4 P 4/ 10 epair [3] DISASSEMBLY/ASSEMBLY OF PUMP SECTION [3] -1. Pump Section (cont.) DISASSEMBLING (4) Disassemble Impeller and Pump frame as drawn in Fig. 4. Fig. 4 1. After removing Spark plug, drive 1R372 to 3. Apply 1R090 to the rib (Fin) of Impeller, then turn the place where Spark plug was mounted.
  • Page 5 P 5/ 10 epair [3] DISASSEMBLY/ASSEMBLY OF PUMP SECTION [3] -1. Pump Section (cont.) ASSEMBLING (1) Assemble Refueling handle group to Handle as drawn in Fig. 5. Fig. 5 2. Assemble Refueling handle group to Handle with 1. When the lever of Refueling handle group is fully Pan head screw.
  • Page 6 P 6/ 10 epair [3] DISASSEMBLY/ASSEMBLY OF PUMP SECTION [3] -1. Pump Section (cont.) ASSEMBLING (4) Assemble Pump frame as drawn in Fig. 8. Fig. 8 Wad (Wave washer) Gasket (Flat washer) 1. Pass each M6x40 Hex socket head bolt through O ring Wave washer, Flat washer and O ring.
  • Page 7 P 7/ 10 epair [3] DISASSEMBLY/ASSEMBLY OF PUMP SECTION [3] -1. Pump Section (cont.) ASSEMBLING (5) Assemble Impeller and Volute to Pump frame as illustrated in Fug. 10. Fig. 10 1. Mount Impeller to the drive shaft 2. Assemble Volute to Pump frame while fitting its projections of the Engine, by turning it clockwise to the accepting ribs on Pump frame.
  • Page 8 P 8/ 10 epair [3] DISASSEMBLY/ASSEMBLY OF PUMP SECTION [3] -1. Pump Section (cont.) ASSEMBLING (7) Assemble Base as drawn in Fig. 12, and check the condition of Impeller, in case of replacing the Engine to the new one. Fig. 12 Assemble Rubber foot to Base with M6x15 Hex bolt, Flat washer, Spring washer and M6 Hex nut.
  • Page 9 P 9/ 10 epair [3] DISASSEMBLY/ASSEMBLY OF PUMP SECTION [3] -1. Pump Section (cont.) ASSEMBLING (9) Assemble Refueling winding to Refueling handle group as drawn in Fig. 13. Fig. 13 1. Align the hole for Stopper of Refueling winding to the curve of Refueling handle group. Stopper 2.
  • Page 10 [3] DISASSEMBLY/ASSEMBLY [3] -2. Difference between Engine EH035P for EW1060H and EH035 for Brush cutters EH035P is different from EH035 as drawn in Fig. 15. After removing Blower housing, separate two M6x16 Pan head screws, Ring 17 and Shaft from Flywheel.