Connection To The Mains Supply - Breville Antony Worrall Thompson JE15 User Manual

This appliance is fitted with either a moulded or rewirable BS16, 1 amp plug. The fuse should
be rated at 5 amps and be ASTA approved to BS16.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance
must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord and an
appropriate plug fitted as detailed below. If you remove the plug it must not be connected to a 1
amp socket and the plug must be disposed of immediately.
The wires of the mains lead are coloured in accordance with the following code:
The wire which is coloured Blue, must be connected to the terminal which is marked with the
letter N or coloured Black.
The wire which is coloured Brown, must be connected to the terminal which is marked with the
letter L or coloured Red.
If any other plug is used, a 5 amp fuse must be fitted either in the plug or adaptor or at the
distribution board.
CAUTION: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL IN THE PLUG
WHICH IS MARKED E OR WITH THE EARTH SYMBOL ( ) OR COLOURED GREEN OR
GREEN AND YELLOW.
This symbol indicates that this unit is a Class II appliance and therefore an earth
connection is not required.

connection to the mains supply

BLUE – NEUTRAL BROWN – LIVE
Plug should be BS1363/A approved
Fit a 5 Amp Fuse
BLUE
(Neutral)
Ensure that the outer sheath of the cable
is firmly held by the clamp
5 Amp Fuse
BROWN
(Live)
9