Advertisement
Remove the heater from all packaging and place it in desired location in accordance
with the above guidelines.
Please ensure that there is a safe area between the heater and furniture, curtains,
etc. 50cm safe area for the top and sides and 120cm safe area from the front grill.
Unwind the Power Cord and plug it into the Power Outlet.
To turn on the heater turn the knob (2) clock-wise.
0
= Off
Fan
= Cooling Mode
I
= Heating low fan setting
II
= Heating High fan setting
Thermostat control (Knob1), turn thermostat clockwise to increase the room
temperature and allow the room to warm up. When the room is at the required
temperature, adjust the thermostat anti clockwise until the heater switches off.
Leaving the heater at this setting will maintain the required temperature in the room.
Please note that if the room is very large the product might not be sufficient to reach
the required temperature.
2580
OPERATION
Knob 1
3
Knob 2
Ver. 3 - 09/18
Advertisement
