Download Print this page
Eaton Metalux SLSTP 8x8 Row Mount Bracket Installation Instructions Manual
Eaton Metalux SLSTP 8x8 Row Mount Bracket Installation Instructions Manual

Eaton Metalux SLSTP 8x8 Row Mount Bracket Installation Instructions Manual

Advertisement

Available languages

Available languages

Quick Links

IB519086EN
Installation Instructions – SLSTP 8x8 Row Mount Bracket
Directives d'installation – Support en série 8x8 SLSTP
Instrucciones de instalación - Soporte de montaje en hilera SLSTP
8x8
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Eaton assumes no responsibility for claims brought
about by improper or careless installation or handling
of this product.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
IMPORTANT: Read carefully before installing row mount bracket. Retain for future reference
8x8 Row Mount Bracket
1.
Remove lens and channel cover as shown in Figure 1
Figure 1
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before handling fixture.
N
otice:
Minimum 90° supply conductors.
N
otice:
Green ground screw provided in proper location.
Do not relocate.
N
ote:
Specifications and dimensions subject to change
without notice.
Brand Logo
reversed out of
black
INS #
INS #

Advertisement

loading
Need help?

Need help?

Do you have a question about the Metalux SLSTP 8x8 Row Mount Bracket and is the answer not in the manual?

Questions and answers

Summary of Contents for Eaton Metalux SLSTP 8x8 Row Mount Bracket

  • Page 1 Risk of burn. Disconnect power and allow fixture to cool Eaton assumes no responsibility for claims brought before handling fixture. about by improper or careless installation or handling otice: Minimum 90°...
  • Page 2 DETAIL A SCALE 1 : 1.5 Figure 2 Slide the row mount bracket into place (Figure 3). ote: The orientation of the bracket is important for successful row mounting. Figure 3 EATON IB519086EN Installation instructions...
  • Page 3 Slide the other end of the bracket into the fixture you wish to row mount to (Figure 4). Optional: Use included screws to fasten the bracket into place. End of Fixutre 1 Start of Fixutre 2 Figure 4 EATON IB519086EN Installation instructions...
  • Page 4 électricien qualifié ou une personne familière avec MISE EN GARDE la construction et le fonctionnement du produit, ainsi qu’avec les risques inhérents. Eaton n’assume aucune Risque de brûlures. Débranchez la source d’alimentation et responsabilité quant aux réclamations dues à une laissez refroidir le luminaire avant de le manipuler.
  • Page 5 Ensuite, serrer le canal et tirer pour retirer le capuchon d’extrémité en métal. DÉTAIL A ÉCHELLE 1:1,5 Figure 2 Faire glisser le support en série en place (figure 3). L ’orientation du support est importante pour réussir à le mettre en place. ote: Figure 3 EATON IB519086EN Instructions d’installation...
  • Page 6 Faire glisser l’autre extrémité du support sur le luminaire sur lequel vous souhaitez fixer le support. Ensuite, utiliser les vis fournies pour fixer le support en place (figure 4). Fin du luminaire 1 Début du luminaire 2 Figure 4 EATON IB519086EN Instructions d’installation...
  • Page 7 Riesgo de quemaduras. Desconecte la energía y deje enfriar la de instalación aplicable. Eaton no asume ninguna luminaria antes de manipularla. responsabilidad por los reclamos ocasionados por Conductores de alimentación para un mínimo de...
  • Page 8 Detalle A Escala 1: 1.5 Figura 2 Deslice el soporte de montaje de hilera en su lugar (Figura 3). ota: La orientación del soporte es importante para el montaje exitoso de la hilera. Figura 3 EATON IB519086EN Instrucciones de instalación...
  • Page 9 Deslice el otro extremo del soporte en la luminaria que desea montar en hilera. Luego, use los tornillos incluidos para sujetar el soporte en su lugar (Figura 4). Final de la luminaria 1 Inicio de la luminaria 2 Figura 4 EATON IB519086EN Instrucciones de instalación...
  • Page 12 Warranties and Limitation of Liability Please refer to www.eaton.com/LightingWarrantyTerms for our terms and conditions. Garanties et limitation de responsabilité Veuillez consulter le site www.eaton.com/LightingWarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.eaton.com/LightingWarrantyTerms para conocer nuestros términos y condiciones.