Messner power-X2 4000 Manual

Hide thumbs Also See for power-X2 4000:

Download this manual

power-X2 4000

power-X2 6000

power-X2 8000

power-X2 10000

power-X2 14000

Need help?

Do you have a question about the power-X2 4000 and is the answer not in the manual?

Page 1 4000 power-X2 6000 power-X2 8000 power-X2 10000 power-X2 14000...
Page 3 min. 25 cm max. 2 m min. 2 m min. 2 m...
Page 5 Please read the instructions thoroughly before using the pump! Otherwise you may not use it! This appliance is not suitable for use by persons (including children) with limited physical, sensory or mental capabilities or lacking experience and/or knowledge, except if they are supervised by a person responsible for their safety or have been instructed in the use of the appliance.
Page 6: Overload Protection
(10). Clean all parts with clear water and a soft sponge. Note! In case of massive calcination please use Messner decalciﬁ er for pumps art.-no. 168 / 009115. Assembly (see ﬁ g. 4 - 8) Push the O-ring (16) onto the starting point on the motor housing (10).
Page 7 To order spare parts, please indicate the pump type, the designation and the Art.-No. from the table below (see also ﬁ g. 8). Item Designation Pump Type Art.-No. Number 1 Upper shell power-X2 4000 - 14000 104 / 004317 2 Lower shell power-X2 4000 - 14000 104 / 004318 3 Top screen insert power-X2 4000 - 14000...
Page 8 Stamp and Signature of Dealer / Date of purchase _____________________________________________ _________________________________________________________________________ © Meßner GmbH & Co. KG · Gewerbegebiet Echternhagen 7 · D - 32689 Kalletal...

Power-x2 6000 Power-x2 8000 Power-x2 10000 Power-x2 14000156/005040156/005041 ... Show all