AGPtek BTS141 User Manual page 7

pairing. Waiting for some seconds, you will see
connected message as shown on your device. (For
some Bluetooth devices, you may need to input
"0000" as pairing password).
4. If pairing is successful, the
show on the display. Then you can start to play
music by the device.
5. Press and hold
not in use.
 Disconnect from paired device
1. Press
"Searching/Pairing" mode, the paired device will be
disconnected. Or, you can choose "Disconnect" from
Bluetooth paired device list on your mobile device.
In this case; the Bluetooth Speaker will turn back
into "Searching/Pairing" mode in seconds, a series
of tones will sound and the
2. Now, you can process for new mobile device pair or
power off the Bluetooth Speaker. Note: If Bluetooth
is not connected for more than 8 minutes, this
device will shut down automatically.
 Auto re-connect with paired device and New
pairing
and hold
to turn off the device when it is
to
6
icon will constantly
switch
is blinking fast.
to new