Advertisement
Available languages
Available languages
1. In some circumstances the device's function may
hanging and need to reset. To reset the Bluetooth
speaker;
2. Insert a needle into reset hole near Micro USB
socket. Then the device will reset automatically.
3. After that, turn on the Bluetooth Speaker by press
and hold button
Note: Do not reset the device if it is in properly
working.
J. Splash Proof Handling
The Bluetooth Speaker can handle a brief jet of water
on its surface (IPX5 water resistant). However, it should
never be operated under running water and under no
circumstance it should never be fully immersed in water.
Before use the Shower Bluetooth speaker in bathroom,
make sure that the splash proof "Rubber Seal Cover " is
tighten closed at the right position.
After used in bathroom, always wipe the outside of the
cabinet thoroughly if it becomes wet with moisture or
water splashes. This will help to prevent the internal
parts of the unit from entry of water and possible
moisture damage.
/ .
12
Advertisement
