Using The Appliance - Kompernass KH 4212 Operating Instructions Manual

Items supplied
Insect Killer Lamp
Operating Instructions
Technical Data
Power supply :
or external power transformer, 6V
1000 mA (not supplied)
High voltage mesh:
UV light tube:
Power transformer
(Batteries not supplied)
Input voltage :
Output voltage:
Output level:
Protection class:
APPLIANCE DESCRIPTION
1 On/Off switch
2 Protective mesh
3 Power transformer socket
4 Connecting cable
5 Battery holder
6 Battery compartment cover
7 Locking device
4 Batteries 1.5 V
Size D, Mono
(Batteries not supplied)
/
700 V
4 W
230 - 240 V ~ 50Hz
6 V 1000 mA
6 VA
II /
Preparing the appliance for use
Battery operation
1. Loosen the locking device 7 on the battery
compartment 6 and slide it in the direction of
the arrow. Withdraw the battery compartment
cover 6 from the retainer tracks.
2. Pull the battery holder 5 out of the battery com-
partment. Take care not not to pull on the con-
necting cable 4.
3. Insert batteries of type D into the battery holder 5
as per the marked polarities.
4. Replace the battery holder 5 into the battery
compartment so that it runs into the retainer tracks.
Ensure that the connector cable 4 does not be-
come trapped.
5. Slide the battery compartment lid 6 into the
retainer tracks until the snap tab engages when
the lid is closed.
Mains power operation
1. Insert the plug of the power transformer into the
power transformer socket 3.
2. Connect the power transformer with a mains
power socket.

Using the appliance

Mode of operation
Undesirable insects, such as mosquitoes and midges,
are attracted to the UV light. They fly to it and then
make contact with the high voltage mesh, which kills
them quickly.
1. Place the appliance as close as possible to your
seating, on a level and dry surface.
- 3 -