Acer C250i Quick Start Manual page 4

About Your Remote Controller
Operating Instructions
1. Preparation at 1st time usage
(1) Insert Acer WirelessProjection-Kit (UWA5 Wi-Fi dongle) into the WIRELESS KIT port on
projector. (See picture 1)
(Remark: The Wi-Fi dongle cannot be removed after plugging-in)
(2) Plug the power adaptor in your projector depending on landscape mode or portrait mode.
Charge your projector by 3 hours at 1st time usage. (See picture 2)
(3) To turn on projector, long press the power button of the projector for 3 seconds or press
power key on remote controller directly.
(4) Adjust focus ring until the projection image is clear and focused.
(5) Select your preferred start-up language.
NO
1 Power key to turn on/off projector
2 Quick key to enter Bluetooth music mode
3 Confirmation key
4 4 direction keys
5 Back key
6 Quick key to enter home menu
7 Quick menu key
8 Volume up / down
Remark:
1. Batteries are not included.
2. Wi-Fi setting and advanced settings can be controlled by remote
controller only.
3. Powering on projector via remote controller is available while adaptor
is plugged in.
(Picture 1)
Function
(Picture 2)