Table of Contents
Advertisement
5- Rotate and thrust independently to steer the pilot into the ground. Excessive rotation will create
heat and sometimes drop the pilot between the machine and the target housing. Causing loss of
the top of the target (sag) as it's displayed on the monitor.
6- Rotate and point the 12 o'clock position towards the center of the crosshairs then thrust. The
target will move across the screen in the direction that 12 o'clock is pointing too. In most cases
the pilot is needed for grade sensitive bores. Attempt to steer the target across the crosshairs
from left to right trying not to let the center LED loose contact with the intersection of the
crosshairs. Steer up and down as needed aswell. The better you do this the farther you will be
able to progress the pilot wile keeping sight of the target.
35
Operation
LINE AND
GRADE
CROSSHAIRS
Advertisement
Table of Contents
