A- PRESSURE GUAGES. From left to right:
ROTATION- Displays the hydraulic pressure in the rotary circuit.
SYSTEM- Displays the hydraulic pressure that the valves operating at.
THRUST- Displays the hydraulic pressure in the thrust cylinders.
B- 7" LCD SCREEN: Monitoring system to help the operator see the tool joints in the breakout
clamps. Camera has infrared capability with a magnetic base.
C- HYDRALIC LEVERS. From left to right:
BREAKOUT- Used to make up and breakout the tool joints.
FRONT CLAMP- Used to clamp on the downhole side of the tool joint.
REAR CLAMP- Used to clamp on the operators side of the tool joint.
ROTATION- Clockwise and counter- clockwise control of the spindle.
THRUST- Forward and reverse control of the carriage.
D- ELECTRICAL CONTROL BOX: Junction box containing wiring connections
E- FUSES. From left to right:
MAIN POWER- Protects the main electrical circuit
BREAKOUT CAMERA SYSTEM- protects the LCD screen and camera.
F- MAIN POWER TOGGLE AND LIGHT: Turns ON/ OFF all the features on the electrical box.
G- HI ROTATION TOGGLE AND LIGHT: High/ Low rotation speed control. High speed and low torque
when on. Low speed and high torque when off.
H- CLAMP INDICATOR LIGHTS: Red light illuminates when the front and rear clamp are closed.
I- RED MUSHROOM BUTTON: Master e-stop shuts off the engine if pushed. Twist CW to release.
J- FAN TOGGLE: Automatically turns on when in the "OFF" position if the hydraulic oil temperature
reaches or exceeds 130 degrees.
9
Component Description