Lanpro LP-1521 Manual

Lanpro LP-1521 Manual

Wisp mode installation
Hide thumbs Also See for LP-1521:

Advertisement

Quick Links

Wireless - Equipment
LP-1521 Broadband AP Router, 123 Manual.

WISP mode Installation, (without PoE).

LP1521_M123_ENH02W
LP-1521 Broadband AP Router,
123 Manual

WISP mode Installation, (with PoE).

This mode is utilized whenever you wish to connect to a Wireless ISP. This
means that your WAN connection becomes the wireless connection and your
clients connect through the wired ports of your Router.
All the WAN options refer to the wireless connection. We must emphasize
that, in this mode, the DHCP Server should be active and programmed to
supply the IP addresses to those wired clients only, no wireless clients are
allowed.
If you wish to connect additional clients to your network, you will need an
additional LP-1521 configured in AP mode.
In addition, all the firewall options are associated with the wireless
connection, resulting in a segmentation between the wired and the wireless
networks, obtaining a logical separation.
www.lanpro.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LP-1521 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lanpro LP-1521

  • Page 1 Wireless - Equipment LP-1521 Broadband AP Router, 123 Manual. WISP mode Installation, (without PoE). LP1521_M123_ENH02W LP-1521 Broadband AP Router, 123 Manual WISP mode Installation, (with PoE). This mode is utilized whenever you wish to connect to a Wireless ISP. This means that your WAN connection becomes the wireless connection and your clients connect through the wired ports of your Router.
  • Page 2 Wireless - Equipment - 2.4 GHz - LP-1521 Broad Band AP Router, WISP mode (without PoE). WISP mode configuration steps: Please check the package contents, please see Figure 1. Figure 1 Screw the antenna as shown in figure 2. Figure 2 Connect your PC to a LAN port of the LP-1521 as shown in figure 3.
  • Page 3 Wireless - Equipment - 2.4 GHz - LP-1521 Broad Band AP Router, WISP mode (without PoE). In the window shown in figure 7, select: Operation Mode, select: Wireless ISP, select: Apply Change. Figure 7 Once the window that shown in figure 8 pops-up, select: OK.
  • Page 4 Wireless - Equipment - 2.4 GHz - LP-1521 Broad Band AP Router, WISP mode (without PoE). You will now configure the security of your wireless connection to your ISP, in case that your ISP doesn’t provide security, disregard this step, if provided, in the window of figure 11, select: Wireless, Security, and...

Table of Contents