1.Overview Frontview Touch screen(BR1200) Display screen(BR1200s) QRcodecamera Card swiping area The standard card is ID card. Mi-fare card is optional) Palmdetectionarea (optional) Fingerprintsensor Rearview Wires Used to adjust the horizontal position of BR1200/BR1200s Screws fixing hole...
2. Introduction BR1200 supports ID/Mifare card, fingerprint/palm and QR code recognition methods. It is mainly used as a master device embedded in the barrier. It can be used for data collection and verification. It has a 2.8-inch touch screen (187mmx105mmx66mm) and good human-machine interaction. BR1200s is mainly used as a slave device for BR1200 or other access control devices by RS232.
4. Verification Process User verifies the card/fingerprint/palm/QR code Data comparison Verified successfully Barriergateopens 5.Connection (BR1200) Power Connection 12V/3A Power supply Ethernet Connection ZKBioSecurity Cable Computer...
Page 5
BarrierConnection (By relaysignaltoopenthebarriergate) COM2 COM2 Barrier Connection with BR1200s BR1200s Note: BR1200s can be connected with other access control device which supports RS232 communication. The connection method is same as above.
Page 6
6. Application BR1200 is installed at the entrance as a master device and is connected with ZKBioSecurity software through TCP/IP. BR1200s is installed at the exit and communicates with the master device via RS232 communication. BR1200s RS232 Barrier Barrier ZKBioSecurity TCP/IP BR1200 Notes:...