Sony SU-WL450 Installation Information page 13

2
Remove the screws from the
rear of the TV or LCD Monitor.
Note
 Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
3
Attach the Wall-Mount
Attachment (supplied with the
TV or LCD Monitor) to the rear of
the TV or LCD Monitor (to make
it parallel with the wall).
VS
1.5 N·m
{15 kgf·cm}
− 13 (GB) −
4
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
6.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
Standard mounting (2-a)
Belt 
Slim mounting (2-b)
5
Connect the necessary cable(s)
to the TV or LCD Monitor.
Make sure to connect the cables before
installing the TV or LCD Monitor on the
wall. You will be unable to connect the
cables when the TV or LCD Monitor is
installed.
Note
 Subcontract the cable routing in the wall to a licensed
contractor.
 Bundle the connecting cables to prevent stepping on
them before wall mounting.
Pulley 
Screw
(+PSW 6 x 20) 
Screw
(+PSW 6 x 50) 
Spacer (60 mm) 
Pulley 
Screw
(+PSW 6 x 20) 
Spacer (20 mm) 
Belt 
GB