Setting Up the Printer
1. Box Contents
•
Print head
2. Removing Packing Materials
1
Remove and dispose of any packing materials
and orange tape.
2
Open the top cover, remove and dispose of the
orange tape and protective material inside.
a
b
3. Installing the Print Heads
1
Open the print head locking cover on the right.
2
Take out the print head from the package and
remove the label.
•
Ink bottle
•
Power cord
•
Setup CD-ROM
•
Safety and Important Information
•
Getting Started )this manual)
Online Setup
3
Remove the protective tape.
4
Insert the print head into the print head holder.
5
Close the print head locking cover and press
down until it clicks.
6
Press down the joint button completely until it
clicks.
Check!
1