Initial Setup; Using The Tv Controller - Samsung The Frame LS03T Series User Manual

04 Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
• To perform the Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
• If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device, manually add
the TV using Add Device on the dashboard of the SmartThings app, and then continue with the set up process.
• The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
• Noise may occur temporarily when the TV communicates with mobile devices.

Using the TV Controller

You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu. The
Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its
usage, refer to the figure below.
Motion Sensor /
Sound sensor
• When you press the TV Controller button, be careful not to press the motion sensor close to it.
• In Art mode, the power indicator at the bottom of the TV remains off.
• After detaching the Customizable Frame (sold separately) from the TV, push up the remote control sensor so that it
returns to its original position.
– Do not push up the remote control sensor strongly. There is a risk of damage.
Control menu
: Power Off
: Channel Up
: Channel Down
TV Controller button / Remote control sensor
• TV mode
– Press: Move
– Press & Hold: Select
• Art mode
– Press: Switch to the TV mode
The TV Controller button is located on the bottom of the TV.
: Volume Up
: Volume Down
: Source
English - 21