ViewSonic VS17774 User Manual page 54

Update by USB
When an update BIN file is available on the ViewSonic website, users are able to
download and update the system via USB.
To update via USB:
1. Download the upgrade package and unzip the file. You may get a file named
"MstarUpgrade_848.bin".
2. Copy the file to a FAT32 USB, then plug the USB into the rear USB port of the
display.
3. Proceed to update the system via USB: Settings > System > About Device >
System Update > USB Update.
4. During the updating process do not power off the display. The display will
automatically reboot after the updating process has completed.
NOTE: User data will be removed when updating the system by USB. The data in
OPS/SDM will not be removed.
54 54