Operation; Intended Use; Before Starting Work; Batteries And Battery Charging - Oregon Professional Series Original Instruction Manual

Operation

Intended Use

Use your blower only for clearing yards,
gardens, grounds, and facility areas of loose
debris, such as leaves, grass, paper, and dust
Do not use it for other purposes, as misuse
may result in personal injury or property
damage, including damage to the machine

Before Starting Work

Read the Original Instruction
Manual for the battery carefully
before assembling, operating or
servicing the product.
• Check the battery is in good condition free
from any broken, missing or cracked parts
• Check the blower for misalignment or
bending of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation
• Check that the tube is properly installed
• Make sure the battery cable, plug and power
socket are not frayed or damaged
To repair or replace any damage or worn
part, contact Oregon or an authorized Oregon
servicing dealer

Batteries and Battery Charging

• Batteries must be used, stored and charged
within battery use, storage, charging
temperature ranges outlined in the
Specifications section of this manual
• Oregon 120V Professional Series tools are
intended for use only with Oregon 120V
Professional Batteries Read and follow all
instructions provided in the Oregon 120V
Professional Battery Operators Manual
• Oregon 120V Professional Batteries must be
charged only by Oregon 120V Professional
Charger Read and follow all instructions
provided in the Oregon 120V Professional
Charger Operators Manual
Blower Model BLH120VX-NA
Operation

Starting the Blower

• Fully insert the plug into the power socket.
When fully inserted, the LED lights on the
dashboard will activate and be accompanied
by an audible beep.
• Pull the variable speed trigger to activate
the fan Continue to press the variable speed
trigger for extended operation

Stealth Mode™

The Oregon BLH120VX-NA has a Stealth
Mode which reduces fan speed by 15%. The
BLH120VX-NA in Stealth Mode can reduce
noise up to 20% and extend run time more
than 50%.
• To activate Stealth Mode, press the Stealth
Mode button beneath the dashboard. A blue
light above the button indicates the tool is in
Stealth Mode.
• Press the button again to deactivate Stealth
Mode and return to full speed
v
120
11