Fixture Settings; Fixture Information - Prolights Tribe SUNRISE2L User Manual

12

3.13 FIXTURE SETTINGS

It is possible to change the parameter value in the following way:
Dimmer
Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times until
shows DIM MODE, and press the button ENTER to confirm.
• Press the button UP/DOWN to select OFF - DIM1 - DIM2 - DIM3.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
LED Frequency
To adjust the frequency of the LEDs, press the MENU button repeatedly until the display shows LED Fre-
quency, and then press the ENTER button.
• Select the frequency (600Hz - 1200Hz - 2000Hz - 4000Hz - 6000Hz - 25kHz) using the UP/DOWN but-
tons.
• To confirm, press the ENTER key.
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
Fan Mode
To set the Fan Mode press the button MENU so many times until shows FAN MODE, and press the button
ENTER to confirm.
• Press the button UP/DOWN to select AUTO - HIGH.
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
Back Light
To activate Backlight display press the button MENU so many times until shows BACK LIGHT, and press the
button ENTER to confirm.
• Press the button UP/DOWN to select ON - 10S - 20S - 30S.
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.

3.14 FIXTURE INFORMATION

Fixture Hours
Show the fixture working hours.
• Press the button MENU so many times until shows INFORMATION. Press the button ENTER to confirm
• Using the button UP/DOWN to select FIX HOURS, then press the button ENTER to confirm
• Then the display will show the working hours.
Version
Show the fixture firmware version.
• Press the button MENU so many times until shows INFORMATION
• Select through the button UP/DOWN the VERSION menu voice.
• The display will show the firmware data.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
SUNRISE2L