Operating Elements And Connections - Prolights Tribe SUNRISE2L User Manual

4
ELECTRICAL
• Power Supply: 100-240V – 50/60Hz
• Power Consumption (at 230V):154 W
• Power Consumption (at 120V):156 W
• Output (at 230V):24 units on a single power line
• Output (at 120V):12 units on a single power line
PHYSICAL
• Signal Connection: 3p+5p in/out
• Power Connection: PowerCON in/out
• IP:30
• Cooling: Forced air with low noise fan
• Suspension And Fixing: Hanging bracket suitable for safe hanging and positioning
• Dimensions (WxHxD):372x117x214 mm
• Weight:4,5 kg

1.2 OPERATING ELEMENTS AND CONNECTIONS

2
1. MOUNTING BRACKET
2. LOCKING KNOB for the mounting bracket
3. VENTILATION OPENINGS: the openings let the
air flow in. Do not obstruct them.
4. CONTROL PANEL with display and 4 button
used to access the control panel functions
and manage them.
5. GND POINT grounding the fixture to the earth.
6. FUSE OLDER in the event of breakage, always
replace the fuse with the same type and
rating.
7. POWER IN (PowerCON IN): for connection to a
socket (100-240V~/50-60Hz) via the supplied
SUNRISE2L
1
3
5 6 7 8
4
3
9 10 11 12
mains cable.
8. POWER OUT (PowerCON OUT): connect to
supply power to the next unit.
9. SAFETY EYE to attach safety cable.
10. DMX IN (3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +.
11. DMX OUT (3-pole XLR):
1= ground, 2 = DMX -, 3 = DMX +.
12. DMX IN (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C.
13. DMX OUT (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C.
13
Fig.1 - Rear panel