Interlogix UVM-2600 User Manual page 10

poor reception or poor picture quality
(Off/ Low/ Middle/ High).
2. MADi
Select advanced color engine for
automatic picture enhancement (2D/3D).
3. H-Size
Adjust the width (horizontal size) of the
screen image.
4. V-Size
Adjust the height (vertical size) of the
screen image.
5. H-position
Adjust the position of the display
horizontally (left or right).
6. V-position
Adjust the position of the display
vertically (up or down).
 System
1. Sleep Timer
Select time to turn off the monitor.
(Off/15/30/45/60 minute)
2. Language
Select language for OSD
(English/Deutsch).
3. OSD H-Position
Adjust the OSD position of the Display
horizontally (left or right).
4. OSD V-Position
Adjust the OSD position of the Display
vertically (up or down).
EN 8
5. OSD Time out
Adjust the display OSD Menu (5 to 60
seconds).
6. OSD Transparency
Adjust the OSD transparency.
7. Information
Shows the status of the current Display
settings.
8. Memory Recall
Reset the screen to the Factory Preset
Display Settings.
 PIP
1. Multi Window
Activate or cancel the PIP function.
2. Sub Source
Select the input source the PIP screen.
(VGA/HDMI/DVI)
3. Size
Select the PIP display size
(SMALL/MIDDLE/LARGE/DOUBLE
1/DOUBLE 2)
4. Position
Adjust the PIP display position. (R-UP/R-
DOWN/L-DOWN/L-UP)
5. Border Color
Select the border color of the PIP
display. (Black/Blue)
6. Sound Swap
User Manual