Troy-Bilt Thoroughbred 654J Operator's Manual page 19

4. Begin the removal the reverse tine belt as follows:
a. Apply pressure on the idler pulleys to relieve
tension on the reverse tine cable and the wheel
drive cable.
b. Carefully unhook each cable-end.
5. Unloop the wheel drive belt from around the engine
pulley.
6. Unloop the reverse tine belt from the engine pulley.
NOTE:
Replace the reverse tine belt first and the
forward tine belt second. Lastly, reattach the wheel drive
belt to the engine pulley or proceed by replacing it.
NOTE:
To install replacement belts, perform steps 1-6
in reverse order.
4
a
5
6
19
b