Troy-Bilt 634K--ProLine Operator's Manual page 26

MODELS 630C, 634A & 634K
(A) For Model 630C
(B) For Model 634A
and 634K
REF
PART NO.
NO.
1 GW-9517
2 GW-9400
3 GW-50043
4 711-04109
711-04110
5 GW-9401
6 GW-1224-1*
GW-1224-2*
GW-1224-3*
GW-1224-4*
— GW-1325C
* Use as required to obtain between.005" and.015" allowable end-play.
1
4
DESCRIPTION
Snap Ring
Drive Shaft Bearing Cup
Support Washer, Rear
Drive Shaft (B)
Drive Shaft (A)
Drive Shaft Bearing Cone
Shim, Rear Bearing Cap,.010" thick
Shim, same as above, except.030" thick
Shim, same as above, except.005" thick
Shim, same as above, except.062" thick
Shim Set (Incl. the following shims:
two #1224-1, two 1224-2 & one #1224-4)
26
2
5
3
6