Operating Symbols - Troy-Bilt 630B-Tuffy, 634F-Bronco, 634B-Super Bronco Operator's Manual

Decals
For your safety and the safety of
others, various safety and opera-
tional decals are located on your
unit (see Figure 1-2).
Keep the decals clean and legible at
all times. Contact your local ser-
vice dealer or the factory for
replacements if any decals are
damaged or missing.
Refer to the Parts List pages in this
Manual for decal locations, descrip-
tions and part numbers.

Operating Symbols

Various symbols (shown here, with word
descriptions) may be used on the tiller and
engine. Your unit may not have all of the
symbols.
SLOW
FAST
• READ THE OWNER'S MANUAL.
• KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
• KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
• NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
• SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UNCLOG-
GING TINES OR MAKING REPAIRS.
• KEEP BYSTANDERS AWAY FROM MACHINE.
• KEEP AWAY FROM ROTATING PARTS.
• USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.
Starting Stabilization
Message (on engine)
Figure 1-2: Location of safety and operating decals (5.5HP Model shown).
CHOKE
ON
STOP
TILLER DIRECTION
STOP
TO AVOID SERIOUS INJURY:
Forward Clutch Bail
Operating Instruction
R
REVERSE
CHOKE
ROTATING
OFF
LEVER DIRECTION
WARNING
Section 1: Safety
Reverse Clutch Control
Operating Instruction
(Models 634F/634B)
Warning Messages
Hot Surfaces Warning
(on belt cover)
TINES
BAIL
ENGAGED
5
BAIL
DISENGAGED