05BAM066_N8000.Ret.B.1.Doc
Duplicate
›
Press
Alpha
›
Select 1, 2 or 3 (See Below)
To Print Last Customer Receipt
›
Press
1
To Print Any Receipt
›
Press
2
Then Choose the Card Type
2, 3 or 4, and Enter the
Transaction Number +
To Print Last Merchant Receipt
›
Press
3
Batch Review
›
Press
On/Off
›
Use the
Key to Select
Credit, Debit, Cash or Total.
›
Then Press
Enter
Paymt
Review the transactions in order of transaction number
using the
Key to go to the next transaction.
Use the
Key to go to the previous transaction.
NOTE:
* CVV2 (also CVC2 and CID) codes are often requested for manually entered transactions. These codes normally appear on the back
of the card as the last three digits on the right of the signature panel, directly below the mag stripe.
Use numbers only for street address.
-
Terminal will prompt for Clerk ID and invoice number if those options are activated.
4/18/05
3:18 PM
Nurit 8000
Card Verify
›
Press
Until Credit...Verify
Appears on the Screen
›
Swipe Card
Or Enter Acct Number +
›
Enter
Exp. Date +
Paymt
›
Amount +
Enter
Paymt
Card Present?
›
Enter
Press
Enter
for Yes
Paymt
Paymt
›
Or
for No
Menu
Cancel
›
Enter Zip Code +
›
Street Address +
›
Enter CVV2, CVC2, or CID*
Code +
Enter
Paymt
*Will prompt if card is not present. If code is not known or not
present, press
Enter
and choose the appropriate numeric response.
Paymt
Current Report
›
Press
Menu
Cancel
›
Press
1
for Reports
›
Press
Enter
Paymt
for a Detailed Report
Page 2
History Report
›
Press
Menu
›
Press
1
For Reports
›
Enter
Press
3
Paymt
For History Report
Enter the six digit date needed for beginning
of report or press
Enter the six digit date needed for end
of report or press
Select 1 for Totals
Or 2 Per Batch
Follow display prompts to select EDC,
card and transaction types needed on report
or press
Enter
Paymt
Enter
Paymt
Enter
Paymt
Settle Batch
›
Press
F
›
Press
2
for Batch
›
Press
Enter
Paymt
for Batch To Host
-Or-
›
Enter
Press
Paymt
To Batch All Hosts
R
ETAIL
Enter
for date on screen.
Paymt
Enter
for date on screen.
Paymt
three times for ALL.
MMDP00148 Rev. 04/05