Table of Contents
Advertisement
Direct Attach over Copper (DAC) cables have a minimum bend radius of typically 4x the diameter of
the cable (approximately a 1" bend radius). Handle DAC cables carefully to ensure that you do not
crimp or bend the cable beyond a 1" radius, otherwise, you risk damaging the cable.
Models, specifications, and compatibility
The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs.
Table 28: Specifications for SFP+ DAC cables
Product name (SKU)
HPE X242 10G SFP+ to SFP+ 1m DAC Cable (J9281B)
Aruba 10G SFP+ to SFP+ 1m DAC Cable (J9281D)
HPE X242 10G SFP+ to SFP+ 3m DAC Cable (J9283B)
Aruba 10G SFP+ to SFP+ 3m DAC Cable (J9283D)
HPE X242 10G SFP+ to SFP+ 7m DAC Cable (J9285B)
Aruba 10G SFP+ to SFP+ 7m DAC Cable (J9285D)
Table 29: Compatibility for the SFP+ copper cables
Product name
1850 Switch Series
2530 Switch Series
2540 Switch Series
2910al Switch Series
30
SKU
Minimum software required
(J9281B/J9281D, J9283B/J9283D,
J9285B/J9285D)
JL169A
All
J9853A
All
J9854A
J9855A
J9856A
JL354A
All
JL355A
JL356A
JL357A
J9145A
W.14.28
J9146A
J9147A
J9148A
Cable length
Data rate
1 m (3.28 ft)
3 m (9.84 ft)
10.31 Gbps
7 m (22.97 ft)
ArubaOS-Switch and ArubaOS-CX Transceiver Guide
Type
SFP+ cable
Comments
Other models not listed do
not have SFP+ ports.
Other models not listed do
not have SFP+ ports.
J9285B (7m) not supported.
For use in the J9008A 2-port
10GbE SFP+ al module.
Table Continued
Advertisement
Table of Contents
