Table of Contents
Advertisement
Application
1. Sanitizing the CPAP
(1) Connect the Clean-Z to the CPAP with the
tubing, power the Clean-Z to start sanitization.
Note: you may need the tubing connector.
Connector 1---Heated tube, Resmed S10, etc
Connector 2---Resmed Airmini, Philips
Dreamstation GO, etc
Connector 2
Connector 1
(22mm O.D. X 22mm I.D.)
(15mm O.D. X 22mm I.D.)
Warning:
for the CPAP machine with humidifier,
drain water in reservoir before starting the
sanitization process.
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Clean-Z CAD0001 and is the answer not in the manual?