Advertisement
Clean-Z Quick Guide
Clean PAP Mask and Tubing
Insert the filter into the bag and connect the mask to the tubing.
Place the mask into the bag. Close the bag around the tubing
using the velcro. Attach the Clean-Z to the end of the tubing.
The connector adapter might be needed based on your PAP
equipment.
Start Cleaning Process
Connect the power supply to the Clean-Z and plug into an
electrical outlet. Press the power button. The Clean-Z will start
and automatically run through a complete cleaning cycle.
| Assemble Unit
Advertisement
Table of Contents
Related Manuals for motif Clean-Z CPAP Ozone Sanitizer
Summary of Contents for motif Clean-Z CPAP Ozone Sanitizer
- Page 1 Clean-Z Quick Guide | Assemble Unit Clean PAP Mask and Tubing Insert the filter into the bag and connect the mask to the tubing. Place the mask into the bag. Close the bag around the tubing using the velcro. Attach the Clean-Z to the end of the tubing. The connector adapter might be needed based on your PAP equipment.
- Page 2 Do not run the Clean-Z for more than two consecutive cycles. Warning: Do not use the Clean-Z while your PAP machine is in use. The Clean-Z is not a PAP machine. For more information visit: www.motifclean-z.com Manufactured for: Motif Medical LLC Dover, DE 19901...
Need help?
Do you have a question about the Clean-Z CPAP Ozone Sanitizer and is the answer not in the manual?
Questions and answers